2017 hot sale chinese diesel engine driven water pump:
C-IS series diesel fire pump set is the single stage single suction diesel pump. It is in strict accordance with the latest state issued GB6245-1998 performance requirements and test methods developed new standards for fire protection products.
Its diesel’s speed control function contributes to a wider scope for the pump set’s application and performance plus further improvement in the adjustability of pressure and flow. With progressive development of industrial automation, our company provides a fully automatic control system developed by ourselves and all electric units adopt elements from famous brands both at home and abroad, with a reliable guarantee for the pump set’s usability and safety.
Industry-Water supply and cooling circulation systems;
Smelting-Water supply and cooling circulation systems;
Military-Field water supply and island fresh water collecting systems;
Heat supply-Water supply and cooling circulation systems;
Public works-Emergency water drainage;
Agriculture- litigation and drainage system.
1.Pump Outlet: 80-800mm
2.Capacity: 65-11,600 m³/hr
4.Temperature: Max 105°C
5.Max Working Pressure: 25bar
6.Max solids content: 80mg/L
Spectrum Diagram of C-IS Pump:
Performance Parameters of C-IS Pump:
Installation Dimension Diagram of C-IS Pump:
Performance and Characteristics:
I. Complete three starting functions:
1.Manual starting: available for manual and automatic interlocking and for manual starting through the change-over switch;
2. Automatic starting: allowable for three times of starting; sending out “starting failure alarm’ and exiting from the starting state in case of starting failure after three times; if starting is successful once, the time of starting to the rated load is 5-10-15S(subject to the pump set’s capacity);
3. Emergency direct manual starting: available for emergency direct manual starting in case of failure of the automatic control device.
II. Automatic charge and voltage-stabilizing function of accumulator: the accumulator can use the mains supply for the automatic charge of the diesel’s rechargeable motor to ensure the pump set’s smooth starting.
III. Complete indicating system: ready to start, manual starting, automatic starting, set operation, set stop, accumulator charging, over speed, under pressure of diesel lubricating oil, under pressure of oil of pressure booster, under temperature of diesel lubricating oil, over temperature of diesel cooling water, under voltage of accumulator, too low level of fuel oil(or in short), preheating for under temperature of diesel cooling water, and timed in-process check.
IV. Complete alarm or protection system: alarm or protection for starting failure for three times, over speed, under pressure of lubricating oil, under pressure of oil of pressure booster, over temperature of cooling water, and under temperature of lubricating oil; alarm for failure of automatic charging device and under voltage/over voltage of accumulator; and alarm or protection for low level of machine oil.
V. Complete display system: display of lubricating oil pressure and rotation speed of diesel, and charging current and voltage accumulator.
VI. Adjustable flow and pressure: the diesel water pump is mounted with a mechanical or electronic speed regulator which can regulate and change the diesels rotation speed when the water pump's (low and lift head are not in conformity with the actual conditions.
VII. Double accumulator loops: when one accumulator set fails, another set can be put into use automatically.
VIII. Maintenance-free accumulator: unnecessary for frequent filling of the make-up fluid.
IX.Automatic timed in-process check test: generally the fire system is in a standby state, and this pump set is available for testing its standby state automatically and also for alarming promptly.
Cooling Mode of Engine:
Generally out diesel tile pump set adopts a closed forced watt' circulation cooling system for the diesel. The system consists of such pails as water tank, fan, water pump, thermostat, air director and water inlet and outlet hoses. The engine is cooled through the heat exchange of the airflow produced by the fan for the engine surface and its cooling water tank. If the open simulation cooling mode (namely, cooling the engine through the heat exchanger of cooling water delivered by the water p p and the circulated water in the diesel) is needed, please note it in the order.
Power Loss of Diesel:
The diesel's vowel loss is different indifferent conditions. So its necessary to fully consign the impact of the diesel's working environment on the power in selecting the diesel to ensure its normal °octillion and the reasonable matching between 11w diesel power and the water pump.
Oil Tank Capacity:
For a diesel with its power below 200kW, its oil tank can be directly mounted on the pump set, and for a diesel with Is power above 200kW. its oil tank shall be split from it. The following listed oil lank capacities can ensure the 6-hous normal work of diesels with different power values in rated working conditions.
Packaging & Shipping
KYLIN PUMP —Tangshan Kylin Imp. & Exp. Co., Ltd. originally founded in 1994. It covers 67,000 square meters and has more than 1000 employees, including more than 30 senior and intermediate professional technicians.
With a powerful technical force, advanced processing equipment, we supply various pumps, such as heavy slurry pump, Clean Water Pump, Sewage Pump, Multi-stage Pump, Pulp Pump, Stainless Steel Pump, Double Suction Pump, Chemical Pump, Submersible Pump, Fire Fighting Pump. They are exported far to Russia, Middle East, Southeast Asia, South America and North America. These pumps are widely used in different industries, such as petroleum, chemistry, metallurgy, mine, power generation, urban construction and agricultural irrigation.
Q1. What is your product range?
Centrifugal pump, slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, single stage pump, double suction pump, industry pump, oil pump, paper pulp pump, mud pump, self-priming pump, pipe water pump, boiler water pump, etc.
Q2. Are you a manufacturer?
Yes, we have been in manufacturing and marketing industry centrifugal pump since 1994. Tangshan Kylin Imp. & Exp. Co., Ltd. is the subsidiary company of Kylin Pump and mainly for exporting.
Q3. What information should I let you know if I want to get a quotation?
Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also provide the pump model you are using now, price will be calculated as per the pump model, if the above information is not sure, we will recommend relevant product for reference fristly.
Q4. Do you impact the finished product?
Yes, each batch of production and finished product will be quality checked strictly before delivering. The packing will be standard export plywood carton.